RAD Data comm 100 Especificações descarregar pdf (Página 96)

Chapter 4 Configuration Installation and Operation Manual

4-4 Services Egate-100 Ver. 4.0

Callout Step Menu Comments

8 Defining logical ports,

available under

Configuring

Logical Layer Parameters

Main Menu > Configuration >

Logical Layer

Logical ports define groups of

E1/T1 ports and the Ethernet

over PDH encapsulation mode

and parameters (GFP, MLPPP,

HDLC).

This and the following steps

are required to include the

remote RICi units into the

Management VLAN

9 Binding the logical ports to

the corresponding bridge

ports, available under

Configuring the Bridge Ports

Main Menu > Configuration >

Applications > Bridge> Bridge

Ports

10 Adding the bridge ports

associated with the logical

ports to the Management

VLAN, available under

Configuring VLAN

Membership

Main Menu > Configuration >

Applications > Bridge > VLAN

Membership

Adds the Management VLAN

ID to the bridge port.

E-LAN Services

To forward Ethernet traffic from the Gigabit Ethernet ports to the SDH/SONET

ports or vice versa over TDM, you have to define a VLAN and add bridge ports

associated with physical and logical ports as VLAN members.

The diagram below illustrates the data flow for Ethernet traffic between the

relevant Ethernet or PDH and the PSN network ports.

Table

4-3

illustrates the

configuration steps corresponding to the numbers (callouts) in

Figure

4-3.

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 317 318

Comentários a estes Manuais

Sem comentários

RAD Data comm 100 Especificações Página 96

Comentários a estes Manuais

Manuais e produtos relacionados com Redes RAD Data comm 100