RAD Data comm 100 Especificações descarregar pdf (Página 127)

Installation and Operation Manual Chapter 4 Configuration

Egate-100 Ver. 4.0 Configuring Egate-100 for Operation 4-35

Table

4-12. Syslog Parameters

Parameter Description Possible Values

Device logging

status

Determines whether logging to

the Syslog server is enabled or

disabled. When disabled,

Egate-100 logs the events

internally.

Default: Disabled

Enabled

Disabled

Device UDP

port

The local UDP port from which the

Syslog messages are sent.

Default: 514

Note: The port cannot be changed

when the logging status is

enabled.

1–65535

Facility Identifies the software module,

task or function from which the

Syslog messages are sent.

Default: Local 1

Local 1 – Local 7

Severity level Only events that their severity

equals or exceeds

the selected

severity level are sent.

Default: Minor

Critical – corresponds to the

Emergency (0) severity level of

Syslog

Major – corresponds to the Alert

(1) and Critical (2) severity levels

of Syslog

Minor – corresponds to the Error

(3) severity level of Syslog

Warning – corresponds to the

Warning (4) severity level of

Syslog

Event – corresponds to the Notice

(5) severity level of Syslog

Info – corresponds to the

Informational (6) severity level of

Syslog

Debug – corresponds to the

Debug (7) severity level of Syslog.

³ To configure the Syslog server parameters:

1. From the Syslog menu (Configuration > System > Syslog), select Server

Parameters.

The Server Parameters menu is displayed (see

Figure

4-35

2. Configure the Server parameters according to

Table

4-13

3. Select Save.

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 317 318

Comentários a estes Manuais

Sem comentários

RAD Data comm 100 Especificações Página 127

Comentários a estes Manuais

Manuais e produtos relacionados com Redes RAD Data comm 100