RAD Data comm 100 Especificações descarregar pdf (Página 145)

Installation and Operation Manual Chapter 4 Configuration

Egate-100 Ver. 4.0 Configuring Egate-100 for Operation 4-53

Parameter Description Possible Values

Submenu. Refer to

Figure

4-51

³ To configure individual T1 port parameters:

1. Navigate to Main Menu > Configuration > Physical Layer > T3 > T1.

The T1 menu appears as illustrated below.

Egate-100

Configuration> Physical Layer> T3> T1

1. Port Number[1 - 28] ... (1)

2. Administrative Status > (Up)

3. Frame Type > (Unframed)

4. Idle code[0 – ff] ...(5)

5. Alarms > (Unmasked)

Please select item <1 to 4>

F - Forward Port; B - Backward Port

ESC-prev.menu; !-main menu; &-exit

Figure

4-51. Individual T1 Menu

2. Configure the T1 channel according to

Table

4-25

Table

4-25. Individual T1 Parameters

Parameter Description Possible Values

Port Number Number of the T1 port to be configured.

Each T3 port corresponds to 28 T1 ports,

e.g. if the first T3 port has been selected

then only T1 ports 1 – 28 can be configured

1 – 84, depending on

selected T3 port

Administrative

Status

User-controlled activation of the T1 port

Default: Up

Down

Frame Type T1 frame type

Default: Unframed

Unframed

ESF

Idle Code Idle code

This parameter is available for framed T1

only.

Default: 01

0 - ff

Alarms Specifies whether to use masking or not.

Default: Unmasked

Masked

Unmasked

1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 317 318

Comentários a estes Manuais

Sem comentários

RAD Data comm 100 Especificações Página 145

Comentários a estes Manuais

Manuais e produtos relacionados com Redes RAD Data comm 100