RAD Data comm 100 Especificações descarregar pdf (Página 232)

Chapter 5 Monitoring and Diagnostics Installation and Operation Manual

5-28 Performing Diagnostics Tests Egate-100 Ver. 4.0

5.5 Performing Diagnostics Tests

Egate-100 allows you to check network integrity by running ping and PRBS tests

and displaying self-test results.

³ To access test results:

Navigate to Main Menu > Diagnostics.

The Diagnostics menu appears as illustrated in

Figure

5-25

Egate-100

Main Menu> Diagnostics

1. PING >

2. BERT >

3. Self test result >

Please select item <1 to 3>

ESC-prev.menu; !-main menu; &-exit

Figure

5-25. Diagnostics Menu

Running Ping Test

You can ping the remote IP host to check Egate-100 IP connectivity.

³ To ping an IP host:

1. Navigate to Main menu > Diagnostics > Ping.

The Ping menu appears as illustrated in

Figure

5-26

2. From the Ping menu, configure the Remote IP address. This is the IP address

of the host that you intend to ping, 0.0.0.0 to 255.255.255.255.

3. Select Send Ping and set it to On to start sending pings.

4. Select Send Ping and set it to Off to stop the ping test.

Egate-100

Main Menu> Diagnostics> PING

Packets Success Count ... (0)

Packets Failure Count ... (0)

1. Remote IP Address ... (123.12.123.111)

2. Send Ping > (Off)

Please select item <1 to 6>

ESC-prev.menu; !-main menu; &-exit

Figure

5-26. Ping Menu

1 2 ... 227 228 229 230 231 232 233 234 235 236 237 ... 317 318

Sem comentários

RAD Data comm 100 Especificações Página 232