RAD Data comm 100 Especificações descarregar pdf (Página 301)

Installation and Operation Manual Chapter 7 Application Tutorial

Egate-100 Ver. 4.0 WiMAX Backhauling Opposite RICi-4T1 7-57

have to be configured. The bridge ports bound to the host and Fast Ethernet

management port must perform egress tag stripping because they handle

management traffic that had the tag added to the frame, therefore it must be

stripped at egress.

The Port VID can be left as the default value for the bridge ports other than the

Fast Ethernet management port, as user frames arrive tagged. For the Fast

Ethernet port, the Port VID is set to the management VLAN ID.

The configuration of the bridge ports is performed in the Bridge Port menu (Main

Menu > Configuration > Applications > Bridge > Bridge Ports).

³ To configure the bridge port for the host:

• From the Bridge Port menu, configure the Egress Tag Handling for the host

bridge port to perform stripping, as illustrated in

Figure

7-21

³ To configure the bridge port for the Gigabit Ethernet ports:

1. From the Bridge Port menu, configure the bridge port parameters for bridge

port 2, binding it to GbE-1, as illustrated in

Figure

7-22

2. Repeat the same configuration for bridge port 3, binding it to GbE-2.

³ To configure the bridge port for the Fast Ethernet port:

• From the Bridge Port menu, configure the bridge port parameters for bridge

port 4, binding it to ETH MNG, as illustrated in

Figure

7-80

³ To configure the bridge ports for the logical ports:

1. From the Bridge Port menu, configure the bridge port parameters for bridge

port 120, binding it to logical port 120, as illustrated in

Figure

7-81

2. Repeat the same configuration for bridge ports 121 to 123, binding them to

logical ports 121 to 123 respectively.

Egate-100

Main Menu> Configuration> Application> Bridge> Bridge Ports

1. Port Number [1 - 130] ... (4)

2. Port Name ... (Bridge Port 4)

3. Bind to (ETH MNG)

4. Administrative Status > (Up)

5. Ingress Filtering > (Disable)

6. Accept Frame Types > (All)

7. Port VID [1 - 4094] ... (100)

8. Default Priority Tag[0 - 7] ... (0)

9. Replace Priority > (No)

10. Egress Tag Handling > (Stripping)

11. Ingress Tag Handling > (None)

12. Maximum MAC Address[1 - 64000] >...(64000)

Please select item <1 to 12>

F - Forward Port; B - Backward Port; R - Remove Port; S - Save

ESC-prev.menu; !-main menu; &-exit

Figure

7-80. Configuring Bridge Port for Fast Ethernet Port

1 2 ... 296 297 298 299 300 301 302 303 304 305 306 ... 317 318

Comentários a estes Manuais

Sem comentários

RAD Data comm 100 Especificações Página 301

Comentários a estes Manuais

Manuais e produtos relacionados com Redes RAD Data comm 100