RAD Data comm 100 Especificações descarregar pdf (Página 122)

Chapter 4 Configuration Installation and Operation Manual

4-30 Configuring Egate-100 for Operation Egate-100 Ver. 4.0

The Protection menu appears.

2. From the Protection menu, choose APS.

The APS menu appears as illustrated in

Figure

4-30

3. Enable Protection. To do so, select Protection, and then select Yes.

Additional parameters appear as illustrated in

Figure

4-30

4. Configure APS parameters according to

Table

4-10

5. Select Save.

Egate-100

Main Menu> Configuration> System> Protection> APS

1. Protection > (Yes)

2. Mode > (1+1 optim. bidirectional)

3. Working Port > (1)

4. Wait to Restore (sec)[1-720]...(300)

5. Command > (No Command)

6. Flip upon SD > (No)

Please select item <1 to 6>

S - Save

ESC-prev.menu; !-main menu; &-exit

Figure

4-30. APS Configuration Menu

Table

4-10. APS Parameters

Parameter Description Possible Values

Protection Activate or deactivate APS protection

Default: No

Yes

Mode APS mode

Default: 1+1 optimized bidirectional

1+1 optimized bidirectional

Uni-directional

Working Port Port to receive data

Default: 1

Wait to Restore

(sec)

Number of seconds after link recovery before the

next protection switch is possible.

Default: 300

1 – 720

Command • Clear. Removes the previous command.

• Lockout of Protection. Prevents possible APS

switching.

• Force Switch. Moves the active link to the next

port. This option is available for

1+1 Bi-Optimized Bidirectional only.

• No Command. This is the default until a

command is selected.

Clear

Lockout of Protection

Force Switch

Flip upon SD

Whether the two ports flip in the event of signal

Yes

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 317 318

Comentários a estes Manuais

Sem comentários

RAD Data comm 100 Especificações Página 122

Comentários a estes Manuais

Manuais e produtos relacionados com Redes RAD Data comm 100