RAD Data comm 100 Especificações descarregar pdf (Página 159)

Installation and Operation Manual Chapter 4 Configuration

Egate-100 Ver. 4.0 Configuring Egate-100 for Operation 4-67

Table

4-30 MAC Table Parameters.

Parameter Description Possible Values

VLAN Number VLAN of the traffic for this table entry

This parameter can be set in VLAN-Aware

mode only

Default: 0

1-4094

MAC Address MAC address from which traffic is

received

Default: 00 00 00 00 00

Received

Bridge Port

Number of the bridge port used for

traffic of this table entry.

2-130

³ To remove a static address from the table:

• From the Static MAC Table (

Figure

4-64

), select a row containing a MAC

address that you want to remove and type R.

The MAC address is deleted from the table.

³ To clear the MAC table:

1. In the Static MAC Table (

Figure

4-64

), type C.

Egate-100 displays the following message: Are you sure (Y/N)?

2. Type Y to confirm deletion of all MAC addresses from the table.

Configuring the Bridge Ports

A bridge port can be bound to a Gigabit Ethernet port, the Fast Ethernet

management port, or a logical port (including an MLPPP or GFP (VCAT LCAS) port),

as well as the Host port. Bridge Port 1 is always bound to the Host port.

³ To configure the bridge ports:

1. From the Bridge menu, select Bridge Ports.

The Bridge Port menu appears as illustrated in

Figure

4-66

1 2 ... 154 155 156 157 158 159 160 161 162 163 164 ... 317 318

Sem comentários

RAD Data comm 100 Especificações Página 159