
Installation and Operation Manual Chapter 4 Configuration
Egate-100 Ver. 4.0 Additional Tasks 4-107
Viewing Inventory
The inventory displays description of the unit and its ports, its hardware and
software revision, and power supply type.
³ To display the Egate-100 inventory:
1. From the Main menu, select Inventory.
The Inventory table appears. Refer to
Figure
4-123
for STM-1/OC-3 and
Figure
4-124
for T3 respectively.
2. In the Inventory table, use the arrow keys to navigate.
Egate-100
Main Menu> Inventory
Boot Version ... (E1.01)
SW Version ... (2.50E24)
HW Version ... (0.00/A)
INTERFACES INFORMATION
SDH/SONET link 1 ... (155M 1310nm SM SH RJ45(SFP))
SFP: Vendor: Infineon FO GmbH; Part No.: V23848-C18-C56; Rev: F1A8
SDH/SONET link 2 ... (155M 1310nm MM SH RJ45(SFP))
SFP: Vendor: DELTA; Part No.: LCP-155A4HDM; Rev: 000
1Gbe link 1 ... (UTP (1000BaseT),RJ-45)
1Gbe link 2 ... (UTP (1000BaseT),RJ-45)
Power supply 1 ... (Module not installed)
Power supply 2 ... (Module not installed)
Figure
4-123. Inventory Menu ( STM-1/OC-3)
Egate-100
Main Menu> Inventory
Boot Version ... (E1.01)
SW Version ... (2.50E25)
HW Version ... (0.00/A)
Serial Number ... (ID 123456789)
INTERFACES INFORMATION
T3 link ... (BNC)
1Gbe link 1 ... (UTP (1000BaseT),RJ-45)
1Gbe link 2 ... (UTP (1000BaseT),RJ-45)
Power supply 1 ... (Module not installed)
Power supply 2 ... (PS-DC)
Figure
4-124. Inventory Menu (T3)
Comentários a estes Manuais