RAD Data comm 100 Especificações descarregar pdf (Página 169)

Installation and Operation Manual Chapter 4 Configuration

Egate-100 Ver. 4.0 Configuring Egate-100 for Operation 4-77

the desired flow classification and prioritization. Policer configuration can be

defined using the Policer Profiles menu.

Traffic policing

is only available if the application is set to Flows Support. For

information about configuring Flow Support, see

Quick Start Guide

³ To configure policer profiles:

1. Navigate to Configuration > Application > QoS.

The QoS menu appears as illustrated in

Figure

4-72

2. From the QoS menu, select Policer Profiles.

The Policer Profiles menu appears as illustrated in

Figure

4-79.

Egate-100

Configuration > Application > QoS > Policer Profiles

1. Profile Name ... (Policer1)

2. CIR (Kpbs)[0-1000000] ... (0)

3. CBS (Bytes)[0-32767] ... (0)

4. EIR (Kbps)[0-1000000] ... (1000000)

5. EBS (Bytes)[0-32767] ... (12176)

s-Save, r-Remove, f-Forward, b-Backward

ESC-prev.menu; !-main menu; &-exit

Figure

4-79. Policer Profiles Menu

3. Select Profile Name and define a new profile name.

4. Define the associated policer parameters according to

Table

4-33.

5. Select Save.

Table

4-33. Policer Profiles Parameters

Parameter Description Possible Values

CIR Defines the Committed Information Rate (CIR) for the

current profile. The CIR specifies a bandwidth with

committed service guarantee (“green bucket” rate).

Granularity: 64 Kbps up to 130 Mbps and

512 Kbps up to 1 Gbps

Default: 0

0 –1,000,000 kbps

CBS Defines the Committed Burst Size (CBS) for the

current profile. The CBS specifies the maximum

guaranteed burst size (“green bucket” size).

1 x Byte granularity

Default: 1600

0-32767 Bytes

Not

1 2 ... 164 165 166 167 168 169 170 171 172 173 174 ... 317 318

Comentários a estes Manuais

Sem comentários

RAD Data comm 100 Especificações Página 169

Comentários a estes Manuais

Manuais e produtos relacionados com Redes RAD Data comm 100