
Installation and Operation Manual Chapter 1 Introduction
Egate-100 Ver. 4.0 Technical Specifications 1-33
ETH over HDLC
Encapsulation
ETH over HDLC over E1/T1:
RAD-proprietary protocols
Remote Devices
Up to 126 devices
Standard
Compliance
MEF
MEF 9 EPL
10/100BaseT
Management
Port
Compliance
IEEE 802.3
Operation
Full duplex, autonegotiation
Control Port
Interface
RS-232/V.24 (DCE asynchronous)
Data Rate
9.6, 19.2, 38.4, 57.6, 115.2 kbps (user-configurable)
Connector
9-pin, D-type, female (DB-9)
Monitoring
Statistics
System and physical layer alarms
ETH over E1 frame counters
Gigabit Ethernet physical layer alarms and frame
counters
Indicators
POWER
(green/red)
(LED on PS module)
Green: Power supply is functioning properly
Red: Power supply is faulty or not connected to
electrical output.
ALM (red)
On: Alarm exists for interface (GbE, SDH/SONET / T3)
or system
Off: No Alarm
ACT (yellow)
Blinking: Ethernet frame received or sent within the
last second
Off: No frame received or sent within the last second
SYNC (green)
On: STM-1 port is synchronized
Off: LOS, LOF
Power
AC Source
100–240 VAC (±10%), 50/60 Hz
DC Source
48/60 VDC nominal (40–72 VDC)
Power Consumption
40W max
Comentários a estes Manuais