RAD Data comm 146 Manual do Utilizador descarregar pdf (Página 91)

5620 Model Descriptor for LA-110 User’s Manual Chapter 4 Port Configuration and Monitoring

SHDSL Port Configuration 4-41

Table 4-21. SHDSL Port – Physical Layer Status Parameters

Parameter Remarks

Port The selected port

SHDSL

Read-only

Type The protocol application which runs above the physical port.

SHDSL

Read-only

Bit Rate An estimate of the interface's current bandwidth in bits per second.

Read-only

DSP Version The version of the SHDSL standard implemented as reported in an Inventory Response

message.

Read-only

Vendor SW

Version

Vendor software version as reported in an Inventory Response message.

Read-only

Loop

Attenuation (dB)

The current loop attenuation for this endpoint as reported in a Network or Customer

Side Performance Status message.

Read-only

SNR Margin (dB) The current SNR margin for this endpoint as reported in a Status Response/SNR message.

Read-only

No Defect The current state of the endpoint.

On, Off

Read-only

Power Back Off The current state of the endpoint.

On, Off

Read-only

SNR Margin

Alarms

Displays the signal/noise margin in dB, measured at the instant the command has been

received by LA-110.

On, Off

Read-only

Loop

Attenuation

Alarm

Displays the loop attenuation threshold in dB, measured at the instant the command has

been received by LA-110.

On, Off

Read-only

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 201 202

Comentários a estes Manuais

Sem comentários

RAD Data comm 146 Manual do Utilizador Página 91

Comentários a estes Manuais

Manuais e produtos relacionados com Redes RAD Data comm 146