Rad-data-comm ASMI-450 Manual do Utilizador descarregar pdf (Página 70)

ASMi-450 Control from the Control Port

4-12 ASMi-450 Installation and Operation Manual

2. The ASMi-450 displays the node name entry form:

ENTER NODE NAME (MAX 8 CHARACTERS) =

CURRENT NODE NAME = 'name'

where 'name' is the node name the ASMi-450 is currently assigned.

3. Type the desired name, and then press <CR>. The ASMi-450 will display the TIME

and DATE fields, followed by the ASMi-450 prompt.

Note

Before entering a node name, make sure that the PSWD section of the

ASMi-450 internal switch S1 is not set to ON, because in such a case the default

name (blank) is enforced.

DEF NODE------------------------------------------------------------------------------------

Purpose

Define the node number, or address, of the ASMi-450. The allowed range is 0 to 255.

Format

DEF NODE

Use

1. To define the ASMi-450 node number, type:

DEF NODE<CR>

2. The ASMi-450 displays the node entry form:

NODE (0 to 255) = 0

3. Type the desired number in the range of 0 to 255, and then press <CR>. The

ASMi-450 will display the TIME and DATE fields, followed by the ASMi-450

prompt.

Note

Before entering a node number, make sure that the PSWD section of the

ASMi-450 internal switch S1 is not set to ON, because in such a case the default

number (0) is enforced.

DEF PWD--------------------------------------------------------------------------------------

Purpose

Define a new user password for the ASMi-450. The password must have 4 to 8

characters.

Format

DEF PWD

Use

1. Type

DEF PWD<CR>

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 116 117

Sem comentários

Rad-data-comm ASMI-450 Manual do Utilizador Página 70