Optimux-134, Optimux-125
Fiber Multi
lexers for 16 E1/T1 and Ethernet
Specifications
LINK INTERFACES (MAIN AND BACKUP)
Data Rate
OP-134:
• 134-Mbps mode: 135.168 Mbps (RAD
proprietary)
• 34-Mbps mode (E3): 34.368 Mbps
OP-125 (RAD proprietary):
• 125-Mbps mode: 127.38 Mbps
• 25-Mbps mode: 25.910 Mbps
Interface Options
See
Table 1
Note: It is strongly recommended to order this
device with original RAD SFPs installed. This will
ensure that prior to shipping, RAD has performed
comprehensive functional quality tests on the
entire assembled unit, including the SFP devices.
RAD cannot guarantee full compliance to product
specifications for units using non-RAD SFPs.
Connectors
SFP interfaces with LC connectors
Standards
OP-134: ITU G.703, G.742, G.751, G.823,
G.955, IEEE 802.3
OP-125: ITU G.703, G.824, G.955, IEEE 802.3
FAST ETHERNET INTERFACES
Activated via a software key:
34 Mbps mode: 8 Mbps granularity
25 Mbps mode: 6 Mbps granularity
134/125 Mbps mode: full bandwidth
Type
10/100BaseT
Connectors
RJ-45
E1/T1 INTERFACE
Number of Channels
16
Data Rate
E1: 2048 kbps
T1: 1544 kbps
Impedance
E1 balanced: 120Ω
E1 unbalanced: 75Ω
T1 balanced: 100Ω
Connectors
E1 balanced: RJ-45
E1 unbalanced: BNC or IEC-169/13 (in 2U
unit)
Note: For balanced and unbalanced channels in the
same unit, order a 1U-high unit and one
CBL-RJ45/BNC/E1/X adaptor cable for each pair of
BNC connectors.
T1 balanced: RJ-45
HIGH-SPEED INTERFACE
Type
V.35
Connector
DB-25 (ISO-2110 or Telebras pinout)
CONTROL PORT
Type
RS-232 DCE asynchronous
Data Rate
9.6, 19.2, 38.4, 57.6, 115.2 kbps
Connector
9-pin D-type female
ALARM PORT
Type
Dry relay contacts for major and minor
alarms
Connector
9-pin D-type female
INDICATORS
Power
Off – Not powered
On (green) – Normal operation
On (red) – Power malfunction
System
TST (yellow) –
On: Diagnostic loop is performed or
power-up
Flashes: Autobaud detect process
FLT (red) – Power-up
Link SFP (per port)
SYNC LOSS (red) – Signal loss or frame
loss detected on uplink
AIS (yellow) – AIS detected on uplink
(relevant only in 34/25-Mbps
operation mode)
User Ethernet Port
LINK/ACT (yellow) –
On: LAN status is up
Flashes: LAN traffic transfer
100 (green) –
On: 100-Mbps operation
Off: 10-Mbps operation
E1/T1 Interface (per port)
SYNC LOSS (red) – Signal loss detected on
E1/T1 link
AIS (yellow) – AIS detected on E1/T1 link
Management Port
LINK/ACT (yellow) –
On: LAN status is up
Flashes: LAN traffic transfer
100 (green) –
On: 100-Mbps operation
Off: 10-Mbps operation
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais