
FCD-E1L, FCD-T1L
E1/T1 or Fractional E1/T1 Mana
ed Access
Units
FEATURES
• Managed access device for
E1/T1 or Fractional E1/T1
services
• E1/T1 main link interfaces
support both framed and
unframed data
• One or two data ports with
selectable sync data rates of
n × 64 kbps
• Serial data port interfaces:
V.35, RS-530, V.36/RS-449,
V.24, or X.21
• Optional Ethernet or Fast
Ethernet bridge (with or
without VLAN support)
or IP router
• Autoconfiguration function
for plug-and-play operability
• SNMP agent
• Management:
Out-of-band via V.24
supervisory port
Inband via TS0 or
dedicated timeslot over
Frame Relay
• Dial-in option for remote
out-of-band management
• Dial-out for alarm report
• Enhanced diagnostics:
User-activated local and
remote loopbacks
Integrated BER tester
Fractional E1/T1 inband
loop
• Stores 24 hours of
monitored E1 network
performance and last
100 alarms
• Alarm mask configurable for
any alarm
DESCRIPTION
• FCD-E1L and FCD-T1L are
managed access units that can be
used as rate and interface
converters for E1/T1 and fractional
E1/T1 services.
• FCD-E1L and FCD-T1L support a
single- or dual-serial n × 64 kbps
data user interface. Instead of a
serial data interface port, an
Ethernet LAN interface can be
ordered, allowing LAN-to-LAN
connectivity over TDM media.
• FCD-E1L and FCD-T1L operates
with RAD's modular DXC (DACS)
products, as well as E1/T1
equipment of other vendors, to
support multilink star applications,
such as access to SDH networks.
The DXC and FCD units can be
managed with centralized SNMP
network management.
• The E1 interface is compatible
with virtually all carrier-provided
E1 services and meets ITU
recommendations G.703, G.704,
G.706, G.732, G.823, and G.826.
It supports both 2 and 16 frames
per multiframe, with or without
CRC-4. It can also accept a
2048 kbps data stream and
convert it to an ITU-T Rec. G.703
unframed signal for transport over
the E1 main link. Line code is
HDB3. The software-selectable
integral LTU provides a range of
up to 2 km (1.2 miles).
• The T1 interface is compatible with
virtually all carrier provided T1
services, including ASDS from
AT&T and complies with TR-62421.
The T1 interface supports D4 and
ESF framing formats. Zero
suppression over the line is
selectable for either transparent,
B7ZS, or B8ZS coding. The
software-selectable integral CSU
ensures a range of up to 2.1 km
(1.3 miles).
• Programmable timeslot assignment
allows data from each data port to
be placed automatically into
consecutive timeslots. Alternatively,
timeslots can be assigned manually
at user discretion.
• FCD-E1L and FCD-T1L feature
autoconfiguration for
plug-and-play connectivity. Upon
connection to the E1/T1 link, the
units detect the E1/T1 parameters
and perform autoconfiguration
accordingly. This E1/T1 learning
process can be activated via either
a push-button on the
FCD-E1L/FCD-T1L front panel or
a terminal command. The state of
the learning process is monitored
by a dedicated LED indicator
and/or supervision terminal
messages.
Comentários a estes Manuais